skip to Main Content
hilton@hhhdistill.com

Pneumatic Diaphragm Distiller’s Pump 1/2″

$750.00 excl. tax

Rated 0 out of 5
(be the first to review)

The pneumatic diaphragm distiller’s pump has teflon diaphragms which are alcohol resistant and the pressure of the air fills the bladder and then pushes it out.  You can adjust the pressure of your pump by adjusting the pressure of your compressor.  This 1/2″ pump can realistically do 800 l/hr which is plenty for a small distillery. It works well, I know because I use one myself.

If you need transfer hoses have a look at my small diameter EPDM hoses HERE.

8 in stock (can be backordered)

SKU: P015-PNEU Categories: ,

Description

With compliance becoming a big thing in Australia, and for good reason, I have been trying to keep ahead in terms of compliant products.  Pumping alcohol around creates a hazardous zone and according to the AS60079 series of standards any electrical equipment in these zones requires special certification.  Therefore, you’d need an explosion proof pump and they cost a pretty penny.  The other option is to use a pneumatic pump driven by air supplied by a compressor that is not in the hazardous zone.

The pneumatic diaphragm distiller’s pump has teflon diaphragms which are alcohol resistant and the pressure of the air fills the bladder and then pushes it out.  You can adjust the pressure of your pump by adjusting the pressure of your compressor.  This 1/2″ pump can do over 1000 l/hr but I usually work on 800 l/hr as the hoses and fitting all work to reduce the flow.  However, this is plenty for a small distillery.

If you need transfer hoses have a look at my small diameter EPDM hoses HERE.

Reviews

There are no reviews yet.

Be the first to review “Pneumatic Diaphragm Distiller’s Pump 1/2″”

Your email address will not be published. Required fields are marked *

Close search

Basket

Back To Top